.jpeg?w=800&h=800)
.jpeg?w=800&h=800)
Product features:
1. This telescopic slingshot rifle is designed for jungle hunting and fish shooting, making it easy to carry. It can be used for laser aiming and more precise aiming.
2. The retractable barrel makes the shooting speed and intensity more powerful
The 3.40MM wide slingshot head makes aiming and shooting more accurate
4. The slender gun shaped grip is more stable and comfortable. Novice can shoot perfectly
At a traction distance of 5.80 centimeters, the initial speed of the steel ball can reach approximately 300 FPS
6. We will provide you with a fish shooting kit that you can receive to install and play with
7. he size of the slingshot is manually measured, please allow 1-3cm error
8.Due to aviation control, we cannot send laser batteries. The green laser battery model is 16340, and one is needed.
Product parameters:
Main materials: metal+resin
SLINSHOT Weight: 1.7KG
Package weight: 2.5KG
initial velocity：300FPS
Slingshot installation:
|
|
|
|
|
|---|---|---|---|
1Install the bow head: First, find the two thickest black screws and two nuts in the accessories bag, insert the screws into the holes and then put on the nuts, as shown in the picture. Please note that (because the nuts are embedded in the rubber pad, you need to use tools to fix the nuts to tighten the screws) |
2Install the release device: Find four black screws of the same length and insert the release device into the reserved hole of the rod body as shown in the figure |
3Install the laser base: First find the two longest white screws and two nuts, please note (the two nuts do not match the screws, just used to raise the height of the laser base, if you think the height is still not can use other heightening objects instead ) |
4Install the rear handle: first find two yellow screws with the same length (no nut is required), as shown in the figure: insert hole 1 and hole 2, and then tighten them with force |
|
|
|
|
|
|---|---|---|---|
Connecting rear handleAs shown in the picture: Clamp the second segment of the back handle into the first segment, align with the screw hole, find the small yellow screw and the small nut, screw through the round hole side, nut through the corner side, and tighten |
Install front gripAs shown in the picture: first find a short white screw, connect it to the handle, and then find two thick yellow screws (no nut required) to insert from the unthreaded side, and then tighten |
Insert back handle bracketAs shown in the picture: Insert the last section of the rear handle, and insert it forcefully (no screws required). |
Install the laser track tubeAs shown in the picture: First loosen the screw of the laser tracking tube, fasten one edge of the support frame, press the track tube with your thumb and push it to the other side. When you hear the click, the installation is complete |
